Commit 4a6cc061 authored by Ryan Martell's avatar Ryan Martell Committed by Guillaume Poirier

add valid statistics for the RTCP receiver report.

Basically taken verbatim from RFC 1889.
Patch by Ryan Martell % rdm4 A martellventures P com %
Original thread:
Date: Oct 31, 2006 12:43 AM
Subject: [Ffmpeg-devel] [PATCH] RTCP valid receiver statistics....

Originally committed as revision 6879 to svn://svn.ffmpeg.org/ffmpeg/trunk
parent a2171102
......@@ -258,6 +258,98 @@ static int rtcp_parse_packet(RTPDemuxContext *s, const unsigned char *buf, int l
return 0;
}
#define RTP_SEQ_MOD (1<<16)
/**
* called on parse open packet
*/
static void rtp_init_statistics(RTPStatistics *s, uint16_t base_sequence) // called on parse open packet.
{
memset(s, 0, sizeof(RTPStatistics));
s->max_seq= base_sequence;
s->probation= 1;
}
/**
* called whenever there is a large jump in sequence numbers, or when they get out of probation...
*/
static void rtp_init_sequence(RTPStatistics *s, uint16_t seq)
{
s->max_seq= seq;
s->cycles= 0;
s->base_seq= seq -1;
s->bad_seq= RTP_SEQ_MOD + 1;
s->received= 0;
s->expected_prior= 0;
s->received_prior= 0;
s->jitter= 0;
s->transit= 0;
}
/**
* returns 1 if we should handle this packet.
*/
static int rtp_valid_packet_in_sequence(RTPStatistics *s, uint16_t seq)
{
uint16_t udelta= seq - s->max_seq;
const int MAX_DROPOUT= 3000;
const int MAX_MISORDER = 100;
const int MIN_SEQUENTIAL = 2;
/* source not valid until MIN_SEQUENTIAL packets with sequence seq. numbers have been received */
if(s->probation)
{
if(seq==s->max_seq + 1) {
s->probation--;
s->max_seq= seq;
if(s->probation==0) {
rtp_init_sequence(s, seq);
s->received++;
return 1;
}
} else {
s->probation= MIN_SEQUENTIAL - 1;
s->max_seq = seq;
}
} else if (udelta < MAX_DROPOUT) {
// in order, with permissible gap
if(seq < s->max_seq) {
//sequence number wrapped; count antother 64k cycles
s->cycles += RTP_SEQ_MOD;
}
s->max_seq= seq;
} else if (udelta <= RTP_SEQ_MOD - MAX_MISORDER) {
// sequence made a large jump...
if(seq==s->bad_seq) {
// two sequential packets-- assume that the other side restarted without telling us; just resync.
rtp_init_sequence(s, seq);
} else {
s->bad_seq= (seq + 1) & (RTP_SEQ_MOD-1);
return 0;
}
} else {
// duplicate or reordered packet...
}
s->received++;
return 1;
}
#if 0
/**
* This function is currently unused; without a valid local ntp time, I don't see how we could calculate the
* difference between the arrival and sent timestamp. As a result, the jitter and transit statistics values
* never change. I left this in in case someone else can see a way. (rdm)
*/
static void rtcp_update_jitter(RTPStatistics *s, uint32_t sent_timestamp, uint32_t arrival_timestamp)
{
uint32_t transit= arrival_timestamp - sent_timestamp;
int d;
s->transit= transit;
d= FFABS(transit - s->transit);
s->jitter += d - ((s->jitter + 8)>>4);
}
#endif
/**
* some rtp servers assume client is dead if they don't hear from them...
* so we send a Receiver Report to the provided ByteIO context
......@@ -269,10 +361,20 @@ int rtp_check_and_send_back_rr(RTPDemuxContext *s, int count)
uint8_t *buf;
int len;
int rtcp_bytes;
RTPStatistics *stats= &s->statistics;
uint32_t lost;
uint32_t extended_max;
uint32_t expected_interval;
uint32_t received_interval;
uint32_t lost_interval;
uint32_t expected;
uint32_t fraction;
uint64_t ntp_time= s->last_rtcp_ntp_time; // TODO: Get local ntp time?
if (!s->rtp_ctx || (count < 1))
return -1;
/* TODO: I think this is way too often; RFC 1889 has algorithm for this */
/* XXX: mpeg pts hardcoded. RTCP send every 0.5 seconds */
s->octet_count += count;
rtcp_bytes = ((s->octet_count - s->last_octet_count) * RTCP_TX_RATIO_NUM) /
......@@ -292,11 +394,36 @@ int rtp_check_and_send_back_rr(RTPDemuxContext *s, int count)
put_be32(&pb, s->ssrc); // our own SSRC
put_be32(&pb, s->ssrc); // XXX: should be the server's here!
// some placeholders we should really fill...
put_be32(&pb, ((0 << 24) | (0 & 0x0ffffff))); /* 0% lost, total 0 lost */
put_be32(&pb, (0 << 16) | s->seq);
put_be32(&pb, 0x68); /* jitter */
put_be32(&pb, -1); /* last SR timestamp */
put_be32(&pb, 1); /* delay since last SR */
// RFC 1889/p64
extended_max= stats->cycles + stats->max_seq;
expected= extended_max - stats->base_seq + 1;
lost= expected - stats->received;
lost= FFMIN(lost, 0xffffff); // clamp it since it's only 24 bits...
expected_interval= expected - stats->expected_prior;
stats->expected_prior= expected;
received_interval= stats->received - stats->received_prior;
stats->received_prior= stats->received;
lost_interval= expected_interval - received_interval;
if (expected_interval==0 || lost_interval<=0) fraction= 0;
else fraction = (lost_interval<<8)/expected_interval;
fraction= (fraction<<24) | lost;
put_be32(&pb, fraction); /* 8 bits of fraction, 24 bits of total packets lost */
put_be32(&pb, extended_max); /* max sequence received */
put_be32(&pb, stats->jitter>>4); /* jitter */
if(s->last_rtcp_ntp_time==AV_NOPTS_VALUE)
{
put_be32(&pb, 0); /* last SR timestamp */
put_be32(&pb, 0); /* delay since last SR */
} else {
uint32_t middle_32_bits= s->last_rtcp_ntp_time>>16; // this is valid, right? do we need to handle 64 bit values special?
uint32_t delay_since_last= ntp_time - s->last_rtcp_ntp_time;
put_be32(&pb, middle_32_bits); /* last SR timestamp */
put_be32(&pb, delay_since_last); /* delay since last SR */
}
// CNAME
put_byte(&pb, (RTP_VERSION << 6) + 1); /* 1 report block */
......@@ -315,10 +442,14 @@ int rtp_check_and_send_back_rr(RTPDemuxContext *s, int count)
put_flush_packet(&pb);
len = url_close_dyn_buf(&pb, &buf);
if ((len > 0) && buf) {
int result;
#if defined(DEBUG)
printf("sending %d bytes of RR\n", len);
#endif
url_write(s->rtp_ctx, buf, len);
result= url_write(s->rtp_ctx, buf, len);
#if defined(DEBUG)
printf("result from url_write: %d\n", result);
#endif
av_free(buf);
}
return 0;
......@@ -343,6 +474,7 @@ RTPDemuxContext *rtp_parse_open(AVFormatContext *s1, AVStream *st, URLContext *r
s->ic = s1;
s->st = st;
s->rtp_payload_data = rtp_payload_data;
rtp_init_statistics(&s->statistics, 0); // do we know the initial sequence from sdp?
if (!strcmp(AVRtpPayloadTypes[payload_type].enc_name, "MP2T")) {
s->ts = mpegts_parse_open(s->ic);
if (s->ts == NULL) {
......@@ -514,12 +646,14 @@ int rtp_parse_packet(RTPDemuxContext *s, AVPacket *pkt,
return -1;
st = s->st;
#if defined(DEBUG) || 1
if (seq != ((s->seq + 1) & 0xffff)) {
// only do something with this if all the rtp checks pass...
if(!rtp_valid_packet_in_sequence(&s->statistics, seq))
{
av_log(st?st->codec:NULL, AV_LOG_ERROR, "RTP: PT=%02x: bad cseq %04x expected=%04x\n",
payload_type, seq, ((s->seq + 1) & 0xffff));
return -1;
}
#endif
s->seq = seq;
len -= 12;
buf += 12;
......
......@@ -23,6 +23,21 @@
#ifndef RTP_INTERNAL_H
#define RTP_INTERNAL_H
// these statistics are used for rtcp receiver reports...
typedef struct {
uint16_t max_seq; ///< highest sequence number seen
uint32_t cycles; ///< shifted count of sequence number cycles
uint32_t base_seq; ///< base sequence number
uint32_t bad_seq; ///< last bad sequence number + 1
int probation; ///< sequence packets till source is valid
int received; ///< packets received
int expected_prior; ///< packets expected in last interval
int received_prior; ///< packets received in last interval
uint32_t transit; ///< relative transit time for previous packet
uint32_t jitter; ///< estimated jitter.
} RTPStatistics;
typedef int (*DynamicPayloadPacketHandlerProc) (struct RTPDemuxContext * s,
AVPacket * pkt,
uint32_t *timestamp,
......@@ -64,6 +79,8 @@ struct RTPDemuxContext {
URLContext *rtp_ctx;
char hostname[256];
RTPStatistics statistics; ///< Statistics for this stream (used by RTCP receiver reports)
/* rtcp sender statistics receive */
int64_t last_rtcp_ntp_time; // TODO: move into statistics
int64_t first_rtcp_ntp_time; // TODO: move into statistics
......@@ -87,5 +104,7 @@ struct RTPDemuxContext {
};
extern RTPDynamicProtocolHandler *RTPFirstDynamicPayloadHandler;
int rtsp_next_attr_and_value(const char **p, char *attr, int attr_size, char *value, int value_size); ///< from rtsp.c, but used by rtp dynamic protocol handlers.
#endif /* RTP_INTERNAL_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment