Commit 0b61af73 authored by Michael Niedermayer's avatar Michael Niedermayer

Restore WIP g729 code that has been remvoed by diego biurrun.

Signed-off-by: 's avatarMichael Niedermayer <michaelni@gmx.at>
parent 1aad9cd9
......@@ -105,9 +105,20 @@ int16_t ff_acelp_decode_gain_code(
for(i=0; i<ma_pred_order; i++)
mr_energy += quant_energy[i] * ma_prediction_coeff[i];
#ifdef G729_BITEXACT
mr_energy += (((-6165LL * ff_log2(dsp->scalarproduct_int16(fc_v, fc_v, subframe_size, 0))) >> 3) & ~0x3ff);
mr_energy = (5439 * (mr_energy >> 15)) >> 8; // (0.15) = (0.15) * (7.23)
return bidir_sal(
((ff_exp2(mr_energy & 0x7fff) + 16) >> 5) * (gain_corr_factor >> 1),
(mr_energy >> 15) - 25
);
#else
mr_energy = gain_corr_factor * exp(M_LN10 / (20 << 23) * mr_energy) /
sqrt(dsp->scalarproduct_int16(fc_v, fc_v, subframe_size, 0));
return mr_energy >> 12;
#endif
}
float ff_amr_set_fixed_gain(float fixed_gain_factor, float fixed_mean_energy,
......
......@@ -48,6 +48,26 @@ const uint8_t ff_fc_2pulses_9bits_track1_gray[16] =
28, 26,
};
const uint8_t ff_fc_2pulses_9bits_track2_gray[32] =
{
0, 2,
5, 4,
12, 10,
7, 9,
25, 24,
20, 22,
14, 15,
19, 17,
36, 31,
21, 26,
1, 6,
16, 11,
27, 29,
32, 30,
39, 37,
34, 35,
};
const uint8_t ff_fc_4pulses_8bits_tracks_13[16] =
{
0, 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75,
......
......@@ -81,6 +81,37 @@ extern const uint8_t ff_fc_4pulses_8bits_track_4[32];
extern const uint8_t ff_fc_2pulses_9bits_track1[16];
extern const uint8_t ff_fc_2pulses_9bits_track1_gray[16];
/**
* Track|Pulse| Positions
* -----------------------------------------
* 2 | 1 | 0, 7, 14, 20, 27, 34, 1, 21
* | | 2, 9, 15, 22, 29, 35, 6, 26
* | | 4,10, 17, 24, 30, 37, 11, 31
* | | 5,12, 19, 25, 32, 39, 16, 36
* -----------------------------------------
*
* @remark Track in the table should be read top-to-bottom, left-to-right.
*
* @note (EE.1) This table (from the reference code) does not comply with
* the specification.
* The specification contains the following table:
*
* Track|Pulse| Positions
* -----------------------------------------
* 2 | 1 | 0, 5, 10, 15, 20, 25, 30, 35
* | | 1, 6, 11, 16, 21, 26, 31, 36
* | | 2, 7, 12, 17, 22, 27, 32, 37
* | | 4, 9, 14, 19, 24, 29, 34, 39
*
* -----------------------------------------
*
* @note (EE.2) Reference G.729D code also uses gray decoding for each
* pulse index before looking up the value in the table.
*
* Used in G.729 @@6.4k (with gray coding)
*/
extern const uint8_t ff_fc_2pulses_9bits_track2_gray[32];
/**
* b60 hamming windowed sinc function coefficients
*/
......
......@@ -83,7 +83,7 @@
/** Maximum sharpening factor
*
* The specification says 0.8, which should be 13107, but the reference C code
* uses 13017 instead. (Amusingly the same applies to SHARP_MAX in bitexact G.729.)
* uses 13017 instead. (Amusingly the same applies to SHARP_MAX in g729dec.c.)
*/
#define SHARP_MAX 0.79449462890625
......
......@@ -27,6 +27,82 @@
#include "avcodec.h"
#include "celp_math.h"
#ifdef G729_BITEXACT
/**
* Cosine table: base_cos[i] = (1<<15) * cos(i*PI/64)
*/
static const int16_t base_cos[64] =
{
32767, 32729, 32610, 32413, 32138, 31786, 31357, 30853,
30274, 29622, 28899, 28106, 27246, 26320, 25330, 24279,
23170, 22006, 20788, 19520, 18205, 16846, 15447, 14010,
12540, 11039, 9512, 7962, 6393, 4808, 3212, 1608,
0, -1608, -3212, -4808, -6393, -7962, -9512, -11039,
-12540, -14010, -15447, -16846, -18205, -19520, -20788, -22006,
-23170, -24279, -25330, -26320, -27246, -28106, -28899, -29622,
-30274, -30853, -31357, -31786, -32138, -32413, -32610, -32729
};
/**
* Slope used to compute cos(x)
*
* cos(ind*64+offset) = base_cos[ind]+offset*slope_cos[ind]
* values multiplied by 1<<19
*/
static const int16_t slope_cos[64] =
{
-632, -1893, -3150, -4399, -5638, -6863, -8072, -9261,
-10428, -11570, -12684, -13767, -14817, -15832, -16808, -17744,
-18637, -19486, -20287, -21039, -21741, -22390, -22986, -23526,
-24009, -24435, -24801, -25108, -25354, -25540, -25664, -25726,
-25726, -25664, -25540, -25354, -25108, -24801, -24435, -24009,
-23526, -22986, -22390, -21741, -21039, -20287, -19486, -18637,
-17744, -16808, -15832, -14817, -13767, -12684, -11570, -10428,
-9261, -8072, -6863, -5638, -4399, -3150, -1893, -632
};
/**
* Table used to compute exp2(x)
*
* tab_exp2[i] = (1<<14) * exp2(i/32) = 2^(i/32) i=0..32
*/
static const uint16_t tab_exp2[33] =
{
16384, 16743, 17109, 17484, 17867, 18258, 18658, 19066, 19484, 19911,
20347, 20792, 21247, 21713, 22188, 22674, 23170, 23678, 24196, 24726,
25268, 25821, 26386, 26964, 27554, 28158, 28774, 29405, 30048, 30706,
31379, 32066, 32767
};
int16_t ff_cos(uint16_t arg)
{
uint8_t offset= arg;
uint8_t ind = arg >> 8;
assert(arg < 0x4000);
return FFMAX(base_cos[ind] + ((slope_cos[ind] * offset) >> 12), -0x8000);
}
int ff_exp2(uint16_t power)
{
uint16_t frac_x0;
uint16_t frac_dx;
int result;
assert(power <= 0x7fff);
frac_x0 = power >> 10;
frac_dx = (power & 0x03ff) << 5;
result = tab_exp2[frac_x0] << 15;
result += frac_dx * (tab_exp2[frac_x0+1] - tab_exp2[frac_x0]);
return result >> 10;
}
#else // G729_BITEXACT
/**
* Cosine table: base_cos[i] = (1<<15) * cos(i*PI/64)
*/
......@@ -78,6 +154,8 @@ int ff_exp2(uint16_t power)
return result + ((result*(power&31)*89)>>22);
}
#endif // else G729_BITEXACT
/**
* Table used to compute log2(x)
*
......@@ -85,10 +163,17 @@ int ff_exp2(uint16_t power)
*/
static const uint16_t tab_log2[33] =
{
#ifdef G729_BITEXACT
0, 1455, 2866, 4236, 5568, 6863, 8124, 9352,
10549, 11716, 12855, 13967, 15054, 16117, 17156, 18172,
19167, 20142, 21097, 22033, 22951, 23852, 24735, 25603,
26455, 27291, 28113, 28922, 29716, 30497, 31266, 32023, 32767,
#else
4, 1459, 2870, 4240, 5572, 6867, 8127, 9355,
10552, 11719, 12858, 13971, 15057, 16120, 17158, 18175,
19170, 20145, 21100, 22036, 22954, 23854, 24738, 25605,
26457, 27294, 28116, 28924, 29719, 30500, 31269, 32025, 32769,
#endif
};
int ff_log2(uint32_t value)
......
This diff is collapsed.
This diff is collapsed.
......@@ -150,7 +150,11 @@ void ff_acelp_lp_decode(int16_t* lp_1st, int16_t* lp_2nd, const int16_t* lsp_2nd
/* LSP values for first subframe (3.2.5 of G.729, Equation 24)*/
for(i=0; i<lp_order; i++)
#ifdef G729_BITEXACT
lsp_1st[i] = (lsp_2nd[i] >> 1) + (lsp_prev[i] >> 1);
#else
lsp_1st[i] = (lsp_2nd[i] + lsp_prev[i]) >> 1;
#endif
ff_acelp_lsp2lpc(lp_1st, lsp_1st, lp_order >> 1);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment